If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
While i was exploring my new Garmin GPS i found out that many streets, roads and establishments are not yet in our RG map here in the District 4 of Laguna, only the main roads are in our map, the sub street or short cuts have no name yet..i will collect datas and information and upload right away here in RG...
FAQ for Newbies? Read here.
_________________________________
Great victory comes with great sacrifice.
_________________________________
Getting angry is punishing yourself with the mistakes of others.
Sir reiji my current size of map in my gps is 62.6 MB? is it the latest? thanks
definitely not. as suggested, download demo map (has the same data as latest contributor's map), install it and view in mapsource. then look if your area's coverage is still lacking.
definitely not. as suggested, download demo map (has the same data as latest contributor's map), install it and view in mapsource. then look if your area's coverage is still lacking.
Did you:
1. Load/install the RG 1.07 map into your computer and thus in mapsource, then installed it in your Garmin?
2. Load/install the RG 2.04 demo map into your computer, and then check if Mapsource has it 2.04 demo map? You cannot install the 2.04 demo map into your Garmin, coz it will not work, or not work properly.
3. While Mapsource is open, check the upper left hand corner of mapsource and there should be a drop down menu that will allow you to choose between version 1.07 and 2.04 if it is there.
Please confirm if you can see Version 2.04 on mapsource, that should be your basis to contribute new things like Waypoints, Tracks, names, etc.
Did you:
1. Load/install the RG 1.07 map into your computer and thus in mapsource, then installed it in your Garmin?
2. Load/install the RG 2.04 demo map into your computer, and then check if Mapsource has it 2.04 demo map? You cannot install the 2.04 demo map into your Garmin, coz it will not work, or not work properly.
3. While Mapsource is open, check the upper left hand corner of mapsource and there should be a drop down menu that will allow you to choose between version 1.07 and 2.04 if it is there.
Please confirm if you can see Version 2.04 on mapsource, that should be your basis to contribute new things like Waypoints, Tracks, names, etc.
TTFN
Arvin
just a minor correction. we no longer put version number in demo map. what newbies will see on the upper left corner is only "Latest Demo Map."
Did you:
1. Load/install the RG 1.07 map into your computer and thus in mapsource, then installed it in your Garmin?
2. Load/install the RG 2.04 demo map into your computer, and then check if Mapsource has it 2.04 demo map? You cannot install the 2.04 demo map into your Garmin, coz it will not work, or not work properly.
3. While Mapsource is open, check the upper left hand corner of mapsource and there should be a drop down menu that will allow you to choose between version 1.07 and 2.04 if it is there.
Please confirm if you can see Version 2.04 on mapsource, that should be your basis to contribute new things like Waypoints, Tracks, names, etc.
TTFN
Arvin
i can see 1.07 version but not 2.04, what will i do?
i want to contribute..Thanks
i can see 1.07 version but not 2.04, what will i do?
i want to contribute..Thanks
demo version numbers were removed (see related post). you will only see "latest demo map"
so you will only see 1.07 version and "latest demo map" version
Comment