hi peeps,
please list down the nuvi model that are capable of tracing the easter egg (factory installed)
these are the list so far...(basically all the models that ends with 5 like xx5)
for 2 - series
1. 205
2. 205w
3. 255
4. 255w
5. 260w
6. 265
7. 265w
8. 285w
9.
for 5 -series
1. 500
2. 550
3.
for 7 - series
1. 710w
2. 760w
3. 765w
4.
for 4 digit model
1. 1200
2. 1250
3. 1300 (but not the 1234 sequence)
4. 1370t
5.
how to know?
for the 3 digits, do this : http://roadguide.ph/forums/showthread.php?t=384&page=2
as for the 4 digits model, read this page: http://roadguide.ph/forums/showthread.php?t=384&page=10
extract it with wnutrack here: http://roadguide.ph/forums/showpost....6&postcount=15
UPDATING THE POST FROM ARVINS POST
for 2 - series
1. 205
2. 205w (b)
3. 255 (b) (c)
4. 255w (b) (c)
5. 260 / 260w (b) (c)
6. 265
7. 265w
8. 285w (b)
9.
3 series
1. 360 (Not capable)
for 5 -series
1. 500 (b) (reconfirmed by Canman)
2. 550 (b)
3.
for 7 - series
1. 710w
2. 760w (b)
3. 765w (b)
4.
for 4 digit model
1. 1200 (a)
2. 1250
3. 1300 (a) (d) (ver. 4.90 ok)
4. 1350 (a) (ver. 2.50 ok)
5. 1360 (a)
6. 1370t (a)
7. 1460 (a)
8. 1490 (a)
9. 1450 (a) (Japp S Mar 17, 2011)
10. 2360 (a) (Software ver. 3.20 ok Ranmaru 9/10/11)
Ways to access:
(a) In Map view, press speed button on lower right, then press the center of the circular speedometer on the center left screen for 5 sec. You will get to the diagnostic page, press "diagnostic logging" and then press Start recording. 1sec tracks is on, and will display "New log recording" when you turn on your unit.
(b) 1-2-3-4 sequence.. hard to give instructions in text, better visit this forum:
http://www.malfreemaps.com/viewtopic...cond+recording
*You can only Start the recording if your unit has satellite lock, if you do not have satellite lock the Start button will be "Greyed" and unclickable. If this happens just get satellite lock and try again.
(c) Models with HWID 1091 Firmware might not have 1sec tracking feature.
(d) Some models with latest firmware might have an option to save 1sec logs as bin or gpx file. Always choose the gpx option if asked. Then the 1sec track files can be found in the Nuvi unit in the .system/log/gpx copy to your computer drive and open with mapsource wNutrak not necessary anymore. http://roadguide.ph/forums/showthread.php?t=4&page=11
This is how it looks like: http://roadguide.ph/forums/showthread.php?t=4071
from d1754 (as per arvins request) this is method (A) BTW
Nuvi 2465/2565/2575/2595
I Found it on this link
http://masmap.org/cms4/documentation...ads/nuvi-2465/
To activate the 1 second tracklog on the Nuvi 2465/2565/2575/2595, follow these steps:
1. Turn on your Nuvi
2. Press View Map
3. Press the Speed indicator
4. Press the Speedometer for 6 seconds
5. In the Diagnostic Page, scroll down and press the Diagnostic Logging button
6. Press the Start Recording button
7. In the Select Data to log window check GPX
8. Press the Settings button at the top left
9. Press Start
10. You should now see a recording status duration indicator in the top-middle part of the map
11. Once you have finished tracking, you may click the Stop button on the map.
please list down the nuvi model that are capable of tracing the easter egg (factory installed)
these are the list so far...(basically all the models that ends with 5 like xx5)
for 2 - series
1. 205
2. 205w
3. 255
4. 255w
5. 260w
6. 265
7. 265w
8. 285w
9.
for 5 -series
1. 500
2. 550
3.
for 7 - series
1. 710w
2. 760w
3. 765w
4.
for 4 digit model
1. 1200
2. 1250
3. 1300 (but not the 1234 sequence)
4. 1370t
5.
how to know?
for the 3 digits, do this : http://roadguide.ph/forums/showthread.php?t=384&page=2
as for the 4 digits model, read this page: http://roadguide.ph/forums/showthread.php?t=384&page=10
extract it with wnutrack here: http://roadguide.ph/forums/showpost....6&postcount=15
UPDATING THE POST FROM ARVINS POST
for 2 - series
1. 205
2. 205w (b)
3. 255 (b) (c)
4. 255w (b) (c)
5. 260 / 260w (b) (c)
6. 265
7. 265w
8. 285w (b)
9.
3 series
1. 360 (Not capable)
for 5 -series
1. 500 (b) (reconfirmed by Canman)
2. 550 (b)
3.
for 7 - series
1. 710w
2. 760w (b)
3. 765w (b)
4.
for 4 digit model
1. 1200 (a)
2. 1250
3. 1300 (a) (d) (ver. 4.90 ok)
4. 1350 (a) (ver. 2.50 ok)
5. 1360 (a)
6. 1370t (a)
7. 1460 (a)
8. 1490 (a)
9. 1450 (a) (Japp S Mar 17, 2011)
10. 2360 (a) (Software ver. 3.20 ok Ranmaru 9/10/11)
Ways to access:
(a) In Map view, press speed button on lower right, then press the center of the circular speedometer on the center left screen for 5 sec. You will get to the diagnostic page, press "diagnostic logging" and then press Start recording. 1sec tracks is on, and will display "New log recording" when you turn on your unit.
(b) 1-2-3-4 sequence.. hard to give instructions in text, better visit this forum:
http://www.malfreemaps.com/viewtopic...cond+recording
*You can only Start the recording if your unit has satellite lock, if you do not have satellite lock the Start button will be "Greyed" and unclickable. If this happens just get satellite lock and try again.
(c) Models with HWID 1091 Firmware might not have 1sec tracking feature.
(d) Some models with latest firmware might have an option to save 1sec logs as bin or gpx file. Always choose the gpx option if asked. Then the 1sec track files can be found in the Nuvi unit in the .system/log/gpx copy to your computer drive and open with mapsource wNutrak not necessary anymore. http://roadguide.ph/forums/showthread.php?t=4&page=11
This is how it looks like: http://roadguide.ph/forums/showthread.php?t=4071
from d1754 (as per arvins request) this is method (A) BTW
Nuvi 2465/2565/2575/2595
I Found it on this link
http://masmap.org/cms4/documentation...ads/nuvi-2465/
To activate the 1 second tracklog on the Nuvi 2465/2565/2575/2595, follow these steps:
1. Turn on your Nuvi
2. Press View Map
3. Press the Speed indicator
4. Press the Speedometer for 6 seconds
5. In the Diagnostic Page, scroll down and press the Diagnostic Logging button
6. Press the Start Recording button
7. In the Select Data to log window check GPX
8. Press the Settings button at the top left
9. Press Start
10. You should now see a recording status duration indicator in the top-middle part of the map
11. Once you have finished tracking, you may click the Stop button on the map.
Comment