If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
I tried simulating it on mapsource. I chose pavilion mall and shell slex as the points. It correctly simulated the route at 2.8 miles. But when I invert the route it chooses the longer route at 3.3 miles.
I think there is still some error near the waypoint I marked.
you mean it chooses carmona exit? it should be as it is the most logical route. it cannot go back as slex northbound is one-way. going back thru carmona exit, then slex southbound and exiting mamplasan again is 5.9 miles which is longer than the 3.3 miles you mentioned above.
i agree with guru pokz!
FAQ for Newbies? Read here.
_________________________________
Great victory comes with great sacrifice.
_________________________________
Getting angry is punishing yourself with the mistakes of others.
you mean it chooses carmona exit? it should be as it is the most logical route. it cannot go back as slex northbound is one-way. going back thru carmona exit, then slex southbound and exiting mamplasan again is 5.9 miles which is longer than the 3.3 miles you mentioned above.
You're right, I chose the wrong route to simulate.
I tried another route and the mamplasan exit does indeed seem ok.
I just recently updated my navigation software so I'll see how it goes later. Thanks.
attached is a .gdb file supported by a 2-way 1 second tracks converted to polyline and saved as .mp file then zipped. whew....
hoping it's good this time kuya
kuya, zip file contains same gdb file.
FAQ for Newbies? Read here.
_________________________________
Great victory comes with great sacrifice.
_________________________________
Getting angry is punishing yourself with the mistakes of others.
Comment